The cleaning work of Yitian integrated stove can be divided into several key steps to ensure the cleanliness and normal operation of the integrated stove. The following are detailed cleaning steps and precautions: 1. Preparation before cleaning
1. Close the gas valve: Before starting the cleaning, be sure to close the gas valve to ensure that the integrated stove is completely cooled down to prevent accidents.
2. Prepare cleaning tools: Prepare soft gauze, neutral cleaner, hot water, small brush, knife (used to remove stubborn dirt, but use with caution), etc. 2、 Integrated stove surface cleaning
1. Spray cleaning agent: Spray an appropriate amount of specialized cleaning agent on the surface of the integrated stove (such as glass panels, stainless steel surfaces, etc.). Be careful to avoid using acidic or highly corrosive cleaning agents to prevent damage to the surface of the integrated stove.
2. Wipe the surface: Use a soft gauze to gently wipe the surface of the integrated stove, apply the cleaning agent evenly and remove stains. Avoid using steel wool or sharp objects to avoid scratching the surface of the integrated stove.
3. Rinse with clean water: Rinse off any remaining cleaning agents with clean water to ensure that the surface of the integrated stove is clean and free of residue. 3、 Range hood cleaning
There are multiple methods for cleaning the range hood of Yitian integrated stove, which can be selected according to the actual situation:
1. Electric cleaning: Using the principle of high-efficiency electric conduction, the resistance wire is heated to dissolve the oil stains, and then automatically thrown into the oil box. This method is easy to operate, but it requires setting the appropriate time and temperature according to the instructions.
2. Hot water cleaning: Directly impacting the oil stains on the impeller through spraying, hot water and detergent can be used to dissolve the oil stains, and deep cleaning can be carried out by rotating the impeller.
3. Steam cleaning: Use steam for cleaning, but refer to the product manual for specific operating steps. 4、 Furnace head cleaning
1. Remove dirt from the fire hole: Use a small brush to clean the dirt on the furnace head, especially the carbon deposits and impurities inside the fire hole. Stubborn dirt can be gently scraped off with a small knife, but caution should be taken to avoid damaging the furnace head.
2. Check if the fire hole is unobstructed: Ensure that the fire hole is not blocked to ensure combustion performance and safety. 5、 Cleaning of oil collection box
1. Remove the oil collection box: Follow the instructions to remove the oil collection box and pour out the oil stains. Be careful to avoid overfilling the oil tank and causing contamination.
2. Cleaning the oil collection box: Clean the inside and outside of the oil collection box with clean water and detergent to ensure that there is no oil residue.
3. Reinstall the oil collection box: Reinstall the cleaned oil collection box onto the integrated stove and ensure a secure installation. 6、 Other precautions
1. Regular cleaning: It is recommended to thoroughly clean the integrated stove at regular intervals to maintain its good condition and extend its service life.
2. Avoid corrosive substances: Avoid strong chemical contact with the surface and internal components of the integrated stove to prevent damage to the stove.
3. Power safety: Pay attention to power safety during the cleaning process and ensure that the cleaning operation is carried out with the power cut off.
By following the above steps and precautions, it is possible to effectively clean the Yitian integrated stove and maintain its good condition.