The connection method between China Unicom router and wireless router mainly includes the following steps: 1. Preparation work
1. Purchase equipment: Ensure that you have purchased a wireless router suitable for China Unicom broadband and have prepared the necessary network cables.
2. Check the optical modem: For fiber broadband users, it is necessary to ensure that the optical modem equipment has been installed and connected properly. 2、 Connecting lines
1. Fiber broadband connection: - Use a network cable to connect the LAN port (Ethernet port) of the optical modem to the WAN port (or port labeled WAN/LAN, if the router supports adaptive interfaces) of the wireless router. Ensure that the network cable is securely connected and not loose.
2. Community broadband connection: - For community broadband users, directly connect the broadband network cable (or wall network port) to the WAN port (or port labeled WAN/LAN) of the wireless router.
3. Connect computer (optional): - If you need to set up a router through the computer, use another Ethernet cable to connect the computer to the LAN port (or remaining WAN/LAN ports, if the router supports adaptive interfaces) of the wireless router. 3、 Set up wireless router
1. View router information: - Find the router's login address (such as 192, 168, 1, 1), default WiFi name, default administrator password, and other information in the sticker on the back (or other location on the body) of the wireless router. Different brands of routers may have different login addresses and administrator passwords.
2. Connect to default WiFi: - Open the WiFi settings on your phone or computer, turn off mobile data, and connect to the router's default WiFi network. At this point, although I am unable to access the internet, I can still set up my router.
3. Login router settings page: - Enter the router login address in the browser of your phone or computer to enter the router settings wizard page. According to the prompt, enter the administrator password (default administrator password if not modified) and log in to the router settings page.
4. Set internet parameters: - Fill in the corresponding internet account and password (or click next directly) based on the internet access method detected by the system (such as broadband dial-up internet, automatic IP address acquisition, etc.). For China Unicom broadband users, the system may automatically detect them as dial-up internet users, and they need to fill in the broadband account and password provided by China Unicom- On the router settings page, find the "Wireless Settings" option and set the WiFi name (SSID) and password. It is recommended to set a sufficiently complex WiFi password to enhance network security.
5. Save settings and restart router: - After the settings are complete, save all changes and restart the router to apply the new settings. After waiting for the router to restart, you can connect to the network using the newly set WiFi name and password. 4、 Precautions
-During the connection and setup process, please ensure that the network cable is firmly connected without looseness, to avoid unstable network or inability to access the internet due to poor contact.
-If you encounter any problems during the setup process, you can refer to the router's user manual or contact the router manufacturer's customer service for consultation.
-To ensure network security, please regularly change your WiFi password and avoid using overly simple passwords. At the same time, the router's firewall and anti leeching function can be enabled to enhance network security protection capabilities.