The method of using Deli 502 adhesive is as follows:
1. Preparation stage: Clean the surface of the adhesive to ensure that there are no impurities such as dust, oil stains, rust, etc., which can affect the adhesion effect of the glue. For metal surfaces, it is best to polish them to increase roughness; For plastic materials such as PE and PP, it may be necessary to first activate their surfaces.
2. Use glue: Open the cap of the 502 glue bottle and gently tap the tip to remove any remaining glue and avoid dripping. Use scissors or sharp tools to cut a small hole at the tip of the glue to control the amount of glue flowing out. Drip an appropriate amount of 502 glue onto the surface of the object being glued, paying attention to controlling the amount and area of the glue, avoiding too much or too little.
3. Adhesive and curing: Immediately bond the two parts of the adhesive together and hold for a period of time until the glue is completely cured. During the curing process, try to avoid moving or touching the adhesive to avoid affecting the bonding effect. Note that the curing speed of 502 glue is fast, so it should be operated quickly and accurately.
After using 502 glue, the glue bottle mouth and container should be wiped clean in a timely manner, and the bottle cap should be tightly closed. It should be stored in a cool and dry place or refrigerated to prevent the glue from evaporating or deteriorating. At the same time, when using 502 glue, attention should be paid to safety and avoid direct contact with the skin. If it accidentally comes into contact with the eyes or skin, immediately rinse with plenty of water and seek medical attention. Use 502 glue in a well ventilated environment to reduce irritation to the respiratory tract.