The problem of low water in the washbasin faucet may be caused by various reasons. Here are some common reasons and corresponding solutions: Common reasons
1. Insufficient water source pressure: - Insufficient pressure in the water supply department's pipeline network or significant pipeline losses, resulting in a decrease in water source pressure.
2. Internal blockage of faucet: After prolonged use, impurities such as scale and dirt may accumulate inside the faucet, causing blockage of the water pipe and affecting water flow- The sealing gasket inside the faucet may age and be damaged, leading to a decrease in water flow.
3. Blockage of aerator or filter: A aerator or filter is a small component in a faucet used to mix air and water to produce a gentle water flow. If they are blocked by impurities, the water flow will decrease.
4. Sewer blockage: Although this usually does not affect the size of the faucet's water output, slow drainage may lead people to mistakenly believe that the faucet's water output is small.
5. Faucet design or quality issues: Some low-end faucets may have a small water flow due to poor materials and manufacturing processes. solution
1. Check water source pressure: - If you suspect a problem with water source pressure, you can contact the water supply department to understand and report the situation, and request them to improve the pressure of the water supply network- Consider installing a booster device, such as a booster pump, to increase the water source pressure.
2. Cleaning the inside of the faucet: - Remove the filter or aerator of the faucet, check for blockages, and clean it with clean water or acetic acid or other cleaning agents- If there is a serious blockage inside the faucet, it may be necessary to remove the valve core for flushing.
3. Replace the sealing gasket: If the sealing gasket is found to be aged or damaged, it should be replaced with a new one in a timely manner.
4. Replacing the faucet: If none of the above methods can solve the problem, it may be due to design or quality issues with the faucet itself. In this case, replacing the faucet should be considered- Choose faucets with reliable quality, complete functions, and good smoothness, and have them installed by professional personnel.
5. Check the sewer: If the drainage is slow, use a dredging agent or physical negative pressure to clear the sewer and ensure smooth drainage.
By using the above methods, the problem of low water in the washbasin faucet can usually be solved. If the problem persists, it is recommended to have a professional inspect and repair it.