The disassembly method of AOC display bracket may vary depending on the model, but it can usually be carried out according to the following steps: 1. Preparation work
1. Ensure safety: Ensure that the monitor is turned off and the power is disconnected, and all cables connected to the monitor are unplugged to avoid electric shock or damage to the device during disassembly.
2. Preparation tools: Depending on the model and structure of the monitor, it may be necessary to prepare tools such as screwdrivers (such as Phillips screwdrivers, Phillips screwdrivers, etc.), flat tools (such as plastic sheets), tweezers, etc. 2、 Place the monitor
1. Fold down the monitor: Fold down the monitor so that its back is facing up, making it easier to see and access the connection part of the base bracket.
2. Screen protection: When the monitor is placed down, it is best to operate on a soft surface (such as soft cloth, foam, etc.) to avoid scratching the screen. 3、 Remove the base bracket
1. Check the connection method: Check the connection method between the monitor base bracket and the monitor. Some brackets are fixed by screws, while others are connected by buckles or other mechanisms.
2. Remove screws: - If the base bracket is fixed by screws, find the screw hole and use a suitable screwdriver to rotate the screw counterclockwise until the screw is completely loosened and can be removed- Pay attention to checking multiple parts of the bracket, as there may be multiple screws that need to be removed.
3. Disassemble the buckle: - If the base bracket is connected by a buckle, a flat tool (such as a plastic sheet) can be used to gently pry along the gap between the base bracket and the monitor to release the buckle- Do not use overly sharp tools to avoid scratching the surface of the monitor.
4. Separate the base and monitor: - After all fixing devices (such as screws, buckles, etc.) have been removed, try gently separating the base bracket from the monitor- If the base bracket cannot be easily separated, please check if there are any undiscovered fixing devices. 4、 Cleaning and subsequent operations
1. Cleaning dust: After successfully disassembling the base bracket, you can use a soft cloth or tissue to clean the dust or stains on the base bracket and the bottom of the monitor.
2. Install new bracket or perform other operations: As needed, new base brackets can be installed, wall mounted, or other operations can be carried out. precautions
1. Follow the instructions: Different models of AOC monitor base brackets may have different disassembly methods. When disassembling, please be sure to follow the user manual or official guidelines of the monitor.
2. Be careful during the disassembly process to avoid damaging the monitor. Especially when there is a power supply and signal line on the base, special care is required.
3. Retain screws: Removed screws and other small components should be properly stored for use when installing new brackets or performing other operations.
The disassembly method of AOC monitor bracket needs to be determined according to the specific model and connection method, but usually includes preparation work, placing the monitor, disassembling the base bracket, cleaning, and subsequent operations.