Ultra high pressure pneumatic pressure testing pump is a pressure testing device developed based on the working principle of pneumatic testing equipment, with various significant characteristics and a wide range of applications. The following is a detailed introduction to the ultra-high pressure pneumatic test pump: 1. Working principle
The ultra-high pressure pneumatic test pump uses compressed air as a power source and generates pressure through the pneumatic pump. The working principle is roughly as follows:
Compressed air drives the piston of the air motor to perform up and down reciprocating motion.
The movement of the piston drives the lower plunger to reciprocate up and down, thus completing the process of suction and discharge.
The output hydraulic pressure is proportional to the air source pressure, and the corresponding hydraulic pressure can be obtained by adjusting the pressure in the air source.
When the air pressure and hydraulic pressure reach equilibrium, the pneumatic pump stops inflating, the output hydraulic pressure stabilizes at the set pressure, and the boosting speed can be controlled by adjusting the intake air volume. 2、 Functional Features
1. Explosion proof performance: Due to the use of compressed air as a power source, the ultra-high pressure pneumatic test pump has good explosion-proof performance and is suitable for flammable and explosive environments.
2. Pressure adjustable: By adjusting the air source pressure, it is easy to obtain the required hydraulic pressure to meet different testing needs.
3. Controllable Boost Speed: By adjusting the intake volume, the boost speed can be controlled to make the testing process smoother and more accurate.
4. Small size and light weight: Compared to other types of pressure testing pumps, ultra-high pressure pneumatic pressure testing pumps have a smaller volume and lighter weight, making them easy to carry and install.
5. Easy to operate: The device design is reasonable, the operation is simple, and even non professionals can quickly get started.
6. Stable performance: After careful design and rigorous testing, the ultra-high pressure pneumatic test pump has stable performance and can work reliably for a long time. 3、 Application scope
The ultra-high pressure pneumatic pressure test pump is particularly suitable for high and ultra-high pressure testing in the following fields:
1. Oilfield drilling and production projects: high and ultra-high pressure testing of pressure equipment such as blowout protection equipment, valves, pipelines, connectors, and pressure vessels.
2. Research and Inspection Department: Used as a testing tool for performance testing and validation of various pressure equipment.
3. Petrochemical engineering: used for hydraulic testing of all pressure vessels such as lightning arresters, valves, pipelines, boilers, etc. 4、 Precautions for use
When using an ultra-high pressure pneumatic pressure test pump, the following precautions should be taken:
1. Safe operation: Before operation, carefully read the operation manual, wear protective gloves and goggles and other protective equipment to ensure safe operation.
2. Check the equipment: Before use, it is necessary to check whether the equipment is intact and whether the power supply, pressure gauge and other components are working properly.
3. Correct connection: Connect the pipes and equipment to be tested correctly to the pressure test pump, ensuring no air leakage.
4. Adjust pressure: Adjust the air source pressure according to the testing requirements to obtain the required hydraulic pressure.
5. Monitoring the testing process: During the testing process, it is necessary to closely monitor the changes in the testing pressure values to ensure a smooth progress of the testing process.
6. Maintenance: Regularly maintain and upkeep the equipment to maintain its normal working condition and extend its service life.
Ultra high pressure pneumatic pressure testing pump is a powerful and stable pressure testing device with broad application prospects in multiple fields.