When the installation of Mercury wireless network card without driver fails, you can try the following solutions: 1. Check system compatibility
1. Confirm system support: Confirm if your operating system supports the drive free network card. Although drive free network cards typically support multiple operating systems, different models of network cards may have specific system requirements.
2. Updating system patches: For some older systems (such as Windows 7), specific system patches (such as SHA256 signature supported system security patches kb4474419, kb4490628) may need to be installed to properly recognize and use the drive free network card. 2、 Check hardware connections
1. Check USB interface: Ensure that the network card is correctly inserted into the computer's USB interface and that the interface is not damaged or loose.
2. Replace USB port: Try plugging the network card into another USB port on the computer to eliminate the possibility of interface failure. 3、 Close security software
1. Temporarily disable firewalls and antivirus software: Sometimes firewalls or antivirus software may prevent the installation or operation of non drive network cards. You can try temporarily disabling these software and then try installing the network card again. 4、 Manual installation of drivers
1. View Device Manager: Open Device Manager to see if there are any unrecognized devices or devices with exclamation marks related to the network card.
2. Manual installation: If there are relevant prompts in the device manager, you can try installing the driver manually. Although non drive network cards usually do not require additional driver installation, in some cases, it may be necessary to find and install drivers from the files that come with the network card. 5、 Use other installation methods
1. Try using another computer: Insert the non drive network card into another computer to see if it can be recognized and used properly. This helps determine whether the problem lies with the network card itself or on your computer.
2. Contact manufacturer support: If none of the above methods can solve the problem, it is recommended to contact the manufacturer support of Mercury network cards and seek professional help and solutions. 6、 Precautions
1. Maintain patience: Resolving the issue of failed installation of a drive free network card may require some time and patience.
2. Pay attention to backup: Before trying any solution, it is recommended to backup important data just in case.
3. Follow official guidance: Always follow the official guidance and usage instructions of the Mercury network card for operation.
By following the above steps, you should be able to solve the problem of failed driver free installation for Mercury wireless network cards. If the problem persists, please consider seeking professional technical support.