For the process of uploading the Kinco touch screen project, the following steps can usually be followed: 1. Preparation work
1. Download software: Go to the official Kinco website to download upload software that matches your touchscreen model, such as KHManger 2, 5, or KDManager. Ensure that the downloaded software version is compatible with the program version on the touch screen.
2. Install software: Install the downloaded software on the computer and follow the installation wizard to complete the installation process.
3. Prepare data connection: Prepare the data connection cable corresponding to the touch screen and ensure that the driver program for the cable model is installed on the computer. 2、 Upload project
1. Open the software: Launch the installed upload software, such as KDManagerial. exe.
2. Set communication parameters: Set communication parameters with the touch screen in the software, including communication methods (such as USB, serial port, etc.), baud rate, data bits, etc., to ensure that these parameters match the settings of the touch screen.
3. Upload Project: - Click on "Upload Processing" or similar options in the software- Select the 'Upload Project' function- If you need to upload the startup screen file, please make sure to check the corresponding box- Enter the default password (usually 888888, but may vary depending on version or settings). If the project settings prohibit uploading or the password is incorrect, uploading will not be possible.
4. Waiting for upload completion: During the upload process, a progress bar will be displayed on the screen, waiting until the upload is completed. 3、 Precautions
1. Version compatibility: Ensure that the uploaded software is compatible with the program version on the touch screen. If the version is not compatible, software or touchscreen programs may need to be upgraded.
2. Password issue: If you encounter a password error during the upload process, please check if the password is entered correctly or contact the supplier or technical support of the touch screen for assistance.
3. Data backup: Before uploading the project, it is recommended to backup the original data in the touch screen to prevent data loss or damage.
4. Non human factors: If the touch screen is damaged or an old device needs to be upgraded due to non-human factors, please ensure that the project is uploaded correctly according to the above steps and contact technical support for further assistance if necessary.
By following the above steps and precautions, you should be able to successfully upload the project from the Kinco touchscreen to your computer. If you encounter any problems, please refer to the software manual or contact technical support for assistance.